Multi-Function PCD Diamond Aluminium Cutting Saw Blade

Multi-Function PCD Diamond Aluminium Cutting Saw Blade
1. Ultra-stable matrix: high-quality steel plate is used as the matrix, with high strength and high toughness. The saw blade is more stable during use, not easily deformed, and meets the needs of high-precision machining.
2. Diamond serration: The cutter head is made of PCD material, which makes the strength, toughness, wear resistance and service life of the cutter head 50 times higher than that of ordinary saw blades. The quality is hard and the stability is good. The international advanced pressure sintering process is adopted, and the leading technology of improving the strength, toughness and wear resistance of the cutter head is used to meet the continuous and high temperature cutting requirements.
3. Firm welding: the base body and the alloy cutter head are firmly welded, cutting various aluminum alloy profiles, the cutting section is flat, and the cutting speed is fast. The cutter head is sharp, with high hardness, and it is not easy to break the teeth.
4. Expansion groove/silence line: Eliminate the expansion caused by heat during the sawing process, reduce the noise so that the substrate is not deformed, and prolong the service life.
5. High-density fine particles: fine and high-density base particles. The automatic laser cutting heat treatment technology reduces the friction coefficient, and the cutting kerf is small and light.
6. Process: ultra-thin process, strict materials. High pressure and high density. Not only reduces machine wear, but also saves material. Use a saw instead of a planer, the teeth are continuous and not easy to deform.
7.Life: After more than ten years of casting saw blade technology plus high-quality fine base material.

Regular size, support customization

Zhongshan Chunfeng saw Co., Ltd. has been specializing in saw blades for more than ten years, and has continuously improved its equipment and optimized its management in more than ten years,and has fully introduced a complete set of advanced sawing equipment at the same time, it also guides the production and research and development of the enterprise under the guidance of international brand strategy.it has mature teсhnоlоgу аnd ехреrіеnсе іn mаnufасturіng 100mm -2800mm аlumіnum сuttіng ѕаw blаdе, іt іѕ one of the domestic saw blade manufacturing enterprises that have achieved super large saw blades earlier. In terms of product quality and capacity scale, it always takes brand and management as itsgoal and self-innovation as its leading role, taking the neeas of the market as the starting point andconstantly surpassing, we have successfully developed six series of saw blades with the commandingheights of su per large materials, plates, hot saws and other technologies in the industry. It provides professional saw blades with excellent quality and pr actical price for many domestic large aluminum manufacturing enterprises, and also manufactures complete sets and non-standard production for domestic large and advanced machinery. Thank you for entering our direct store! The purpose of our factory is to buy anything or consume only professional, because only professional merchants can do their own characteristics well and provide you with professional services, sol also wan to bring this suggestion to every guest .Chun Feng saw Industry co., Ltd. has always taken " making good saws, making bigsaws, making fine saws" as its purpose, and "making br ands, technology and service" as its concept, we are willing to work hand in hand with you to achieve win-win results by constantly providing new andold customers with moré suitable, optimized and personalized ideal saws

Choice of diameter
The diameter of the saw blade is related to the sawing equipment used and the thickness of the workpiece to be sawed. The diameter of the saw blade is small, and the cutting speed is relatively low; the larger the diameter of the saw blade, the higher the requirements for the saw blade and sawing equipment, and the higher the sawing efficiency. The outer diameter of the saw blade is selected according to different circular saw models and the saw blade with the same diameter is used.
Choice of number of teeth
The number of teeth of the saw teeth, in general, the more cutting edges are cut per unit time, the better the cutting performance. However, the number of teeth should not be too much, and a reasonable number of teeth should be selected according to the thickness of the material being sawed. If the sawtooth is too dense, the chip capacity between the teeth will become smaller, which will easily cause the saw blade to heat up; in addition, if the sawtooth is too many, if the feed rate is not properly matched, the cutting amount of each tooth will be very small, which will aggravate the friction between the cutting edge and the workpiece and affect the cutting edge. service life. Usually the tooth spacing is around 15-25mm.
Choice of thickness
The material of the alloy saw blade base and the manufacturing process of the saw blade determine the thickness of the saw blade. If the thickness is too thin, the saw blade is easy to shake when working, which affects the cutting effect. When choosing the thickness of the saw blade, the stability of the saw blade and the material to be sawed should be considered. The thickness required for some special-purpose materials is also specific, and a reasonable thickness should be selected according to the requirements of the equipment and workpiece processing.
Choice of apertur
Aperture is a relatively simple parameter, which is mainly selected according to the requirements of the equipment.

1.Sawing sticky aluminum?
Whether the installation of the saw blade is accurate and in place, and the tightness is moderate.
2.Aluminum cut card aluminum?
According to the specifications of cutting aluminum, whether the selected saw blade specifications and models are suitable.
3.Sawing with burrs?
Saw and cut aluminum specifications, and whether the cutting speed set by the equipment processing is appropriate.
4. saw with scratches?
Whether the lubrication system of the aluminum cutting equipment is reasonable, good and effective.
5.Spray lubrication is not in place?
Whether the design of aluminum cutting equipment is professional and reasonable.
6.saw blade drop?
Adjust the quality of the lubricating oil and the injection position.
7.Saw blades are not durable?
The welding teeth of the saw blade are not strong or the material is not good.

Tips:Saw blade maintenance
If the saw blade is not used immediately, it should be placed flat or suspended using the inner hole. No other items or footsteps can be stacked on the flat saw blade, and attention should be paid to preventing moisture and rust. When the saw blade is no longer sharp and the cutting surface is rough, it must be re-sharpened in time. Grinding can not change the original angle, and destroy the dynamic level. Correction of the inner diameter of the saw blade, processing of positioning holes, etc ., must be carried out by the manufacturer. If the processing is not good, it will affect the use effect of the product and may be dangerous. In principle, the reaming should not exceed the original diameter of 20mm, so as not to affect the balance of stress.
Multi-Function PCD Diamond Aluminium Cutting Saw Blade